冷卻塔系列 : FWS | FRS |  FCS |  FVS | FW | FT | FC | FR | FRP | SMC

FRS
CTI STD-201
Structure Feature 
Structure Feature Fan
Cross Flow Configuration design provides easier and safer installation and minimize the maintenance cost. Horizontal Discharge arrangement requires lower headroom and is suitable for indoor installation.

Performance Guarantee
The thermal performance is certified by CTI in accordance with STD-201. Drift loss rate is less than 0.001% of circulating water flow rate according to AS 4180 standard.
High Efficiency Axial Fan
High Efficiency Axial Fan
Aerofoil shaped hollow blades are made from Aluminum extrusion alloy and pitch angles are adjustable allowing optimization of the tower performance. High efficient and light in weight ensure low power consumption.
Belt Driven Transmission Belt Driven Transmission
Motors are TEFC type with IP55 protection, Class F insulation and 1.15 service factor. Fans are driven by Vee belts with low tip speed, thus minimizing vibration and ensuring low noise.
3 in 1 Filler
3 in 1 Filler
Fillers are vacuum formed of 0.4mm thick PVC film. Filler sheet configuration incorporate sloped flutes in both air intake and outlet sections and high efficient wet deck media section. The wet deck media section with continuous triangular pattern design provides high efficient heat transfer.
Water Distribution System Water Distribution System
Open gravity flow water distribution basin with removable covers is designed for non-clogging operation and prevents the growth of algae. Special design diffusion decks provide 100% guarantee for full coverage of filler by small droplets.
RDE-100 Drift Eliminator (Optional)  RDE-100 Drift Eliminator (Optional)
3 passes drift eliminator made of 0.4mm thick PVC sheet and placed in front of the outlet section of filler provides further reduction of drift loss rate to 0.001% of circulating water flow.

主頁 | 關於菱和 | 公司資料 | 產品介紹 | 下載  | 招聘 | 聯系我們
Copyright 2007-2019 ryowo.com  All Rights Reserved
版權所有 菱和 (集團) 有限公司
東莞菱和寶德冷熱設備有限公司
更新:2019.08.24